Model Genie 88...More Than Two Pumps in One

Scientific Lab Supply offers the NEW SLS Genie 88. This unique pump is really two pumps in one. Each side of the SLS Genie 88 has its own syringe rack, motor and leadscrew. The pump can infuse simultaneously at different rates, or infuse with one syringe and withdraw with the other.

When combined with a valve box it provides continuous delivery. The SLS GENIE 88 Syringe Pump offers continuous infusion or withdrawal, 24 hours a day, 365 days a year with the accuracy and low flow of a Scientific Lab Supply syringe pump.

The SLS GENIE 88 Pump is a breakthrough in pumping technology. The SLS Model 88 has two independent pumping channels linked through hardware and software. When combined with a valve box, it provides the continuous delivery of a peristaltic or piston pump with the accuracy, absence of pulsation and low flow rates of a syringe pump.

The SLS GENIE 88 Syringe Pump opens up whole new pumping possibilities. These are some of the applications of this pump:

• • The injection of dyes, perfumes and flavoring in industrial applications
• • Applications with liquids or viscous materials in micro-manufacturing
• • Continuous injections of reactants into reactor vessels
• • Simultaneous samplings from two sites
• • Continuous injection for long term toxicology testing

Several modes of operation are available to accommodate a range of setups and experimental protocols. A unique movable limit switch mechanism is used to change direction or stop operation of the pump depending on the mode of operation.

• • Reciprocal/Parallel Mode - Syringe mechanisms can run in the same or opposite directions (i.e. both infusing/withdrawing at the same time or one infusing and the other withdrawing)
• • Proportional Mode - Different flow rates and syringe diameters can be set for each syringe mechanism
• • AutoStop Mode - Pump stops operation when a limit switch is activated.
• • Continuous Run Mode - When a limit switch is activated each syringe mechanism reverses direction.

The pump has high pressure capability and TTL and RS-232 interface for data acquisition and control. The communication ports enable daisy-chaining of up to 100 pumps.

Features:

• • Continuous delivery 24/7
• • RS232 computer interface
• • Daisy chain up to 100 pumps
• • Wide variety of syringes from High or low pressure
• • CE certification
• • TTL interface
• • 57 lbs of linear force
• • 12 month warranty

Benefits:

• • Accurate fluid delivery
• • Consistent delivery of fluids
• • Automatic dispensing of small volumes
• • Simple set up
• • Hands free operation
• • Dependability

Specifications:

• # of Syringes: 2
• Accuracy: 0.35 %
• Average Linear Force: 57 lbs
• Communications: RS-232, TTL
• Communications Level: 2
• Depth English: 11.25 in
• Depth Metric: 28.6 cm
• Display: LED, 5 digit, numeric
• Flow Rate Maximum: 106.6 ml/min
• Flow Rate Minimum: 0.0004 µl/hr
• Height English: 6 in
• Height Metric: 15.2 cm
• Input Power Connection: 36 VDC 1.4 Amps
• Motor: 2 motors, 1/2 to 1/4 microstepping, microprocessor controlled, 0.9° step angle
• Motor Stepper: 1 1,600 at 1/2 stepping; 3,200 at 1/4 stepping Revolution of Lead Screw
• Net Weight English: 15 lb
• Net Weight Metric: 6.8 kg
• Non Volatile Memory: Storage of all settings
• Pressure Specifications: Standard
• Pump Configuration: Standard
• Pump Function: Infuse/Withdraw
• Pusher Travel Rate Maximum: 95.25 mm/min
• Pusher Travel Rate Minimum: 0.726699 µm/min
• RS-232: RJ11-4 Connector
• Reproducibility: 0.1 %
• Step Rate Maximum: 416.7 µsec/step
• Step Rate Minimum: 27.3 sec/step
• Step Resolution: 0.33 µm/step
• Syringe Rack Type: Standard Rack
• Syringe Size Maximum: 140 ml
• Syringe Size Minimum: 0.5 µl
• TTL: 9-pin connector
• Type: Microprocessor dual drive, single syringe, infusion/withdrawal
• Voltage Range: Selectable, 95 to 130 VAC, 60 Hz or 220 to 260 VAC, 50 Hz
• Width English: 12.5 in
• Width Metric: 31.1 cm

NOTE: Scientific Lab Supply syringes are for laboratory use only.

E-mail a friend about this item.

Return to Catalog